What are the specs for this Flame Sensor?

The correct replacement for Goodman model WFD195070S4CAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WFD195070S4CAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WFD195070S4CAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for WFD195070S4CAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13965
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-13965 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement engineered for the WFD195070S4CAA gas furnace and compatible Goodman/Amana models. The flame sensor confirms that a flame is present after ignition; when it fails or becomes coated with oxide buildup, the furnace board drops out the gas valve and locks out. Symptoms of a bad flame sensor include the burners lighting for a few seconds and then shutting off (short cycling), repeated ignition lockouts, and no-heat calls on an otherwise healthy furnace.

Specifications

OEM Part Number: 0130F00010S
Brand: Goodman (fits Amana equivalents)
Component: Flame rectification sensor rod
Application: Residential gas furnace
Primary Fit: WFD195070S4CAA
Material: High-temp stainless rod with ceramic insulator

OEM vs. Generic

This is the factory OEM sensor, built to the exact rod length, mounting angle, and terminal spec Goodman engineered for this furnace — guaranteeing a proper microamp signal to the control board. Generic universal sensors can fit but often require bending the rod or adapting the connector, and a weak signal can cause intermittent lockouts. For a reliable, drop-in repair, OEM is the safe choice.

Installation Difficulty

Easy (1/5). A single mounting screw and one push-on wire connector. Most homeowners can swap it in 10–15 minutes. Always shut off power and gas at the furnace before servicing. Tip: never sand the rod with heavy grit — replacing a worn sensor restores a clean signal far better than cleaning.

Backed by our fast-shipping guarantee. Not sure this is your part? Contact us with your full model and serial number and we'll confirm the fit.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WFD...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WFD195070S4CAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WFD195070S4CAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WFD195070S4CAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu