What are the specs for this Flame Sensor?

The correct replacement for Goodman model WFD18115S5CXCB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WFD18115S5CXCB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WFD18115S5CXCB — 0130F00010S

Name: OEM Goodman Flame Sensor for WFD18115S5CXCB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13886
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-13886 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S flame sensor confirms that a flame is present after ignition on the WFD18115S5CXCB furnace and related models. It uses flame rectification to send a micro-amp signal back to the control board; when that signal drops — usually from oxidation buildup on the rod — the board shuts the gas valve and the furnace short-cycles or locks out. Replacing a fouled or cracked sensor is one of the most common no-heat repairs.

Specifications

Part Number: 0130F00010S
Category: Flame Sensor (flame rectification rod)
Fits: Goodman WFD18115S5CXCB and compatible furnaces
Function: Verifies flame presence, enables continued gas flow
Type: OEM factory replacement with mounting bracket

OEM vs. Generic

The OEM Goodman sensor arrives with the correct rod length, bend, and bracket geometry so it sits in the proper part of the flame envelope. Generic sensors frequently need repositioning and can read a weak flame signal, causing nuisance lockouts. For a reliable, first-try fix, OEM is the safer choice.

Installation Difficulty

Easy. Typically a single screw and one spade connector. Cut power, remove the burner-compartment panel, swap the sensor, and restore power. A 10–15 minute job for most homeowners.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WFD...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WFD18115S5CXCB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WFD18115S5CXCB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WFD18115S5CXCB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu