What are the specs for this Flame Sensor?

The correct replacement for Goodman model WFD18045S3AXCB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WFD18045S3AXCB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WFD18045S3AXCB — 0130F00010S

Name: OEM Goodman Flame Sensor for WFD18045S3AXCB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13814
Price: 39.95 USD
Availability: InStock

SKU: GOODMAN-13814 Brand: Goodman

$39.95 $52.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The 0130F00010S is a genuine OEM Goodman flame sensor (flame rod) for the WFD18045S3AXCB furnace and compatible Goodman/Amana models. The sensor uses flame rectification to prove that the burner has actually ignited: it passes a small microamp signal through the flame back to the control board. If no flame is detected, the board closes the gas valve — a core safety function. A dirty or failed flame sensor is one of the most common causes of a furnace that lights briefly then shuts off (short-cycling).

Specifications

Part Type: Flame sensor / flame rectification rod
Function: Confirms burner ignition and signals the control board to keep the gas valve open
Symptom Fixed: Furnace ignites then shuts down after a few seconds; lockout on repeated tries
Fits: Goodman WFD18045S3AXCB and select Goodman/Amana furnaces
OEM Part Number: 0130F00010S

OEM vs. Generic

The OEM 0130F00010S has the exact rod length, mounting bracket, and terminal that your control board expects, delivering a stable microamp signal. Generic sensors can sit at the wrong depth in the flame or give a weak signal, causing intermittent lockouts. For reliable ignition proving, the genuine part is the better choice.

Installation Difficulty

Easy (2/5). Shut off power and gas, remove one mounting screw, disconnect the single spade wire, and install the new sensor. Avoid touching the rod with bare fingers. This is a common, low-cost repair that often restores a short-cycling furnace to normal operation.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WFD...

$39.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WFD18045S3AXCB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WFD18045S3AXCB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WFD18045S3AXCB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu