What are the specs for this Flame Sensor?

The correct replacement for Goodman model VMSS960803BNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number VMSS960803BNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for VMSS960803BNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for VMSS960803BNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13783
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-13783 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine OEM Goodman 0130F00010S Flame Sensor is the flame-rectification rod that proves burner ignition to the control board on your VMSS960803BNAA furnace. During each heating cycle the board sends a small microamp current through the rod; when flame is present the current is rectified and the gas valve stays open. A dirty, corroded, or failed sensor is the single most common cause of furnace short cycling and ignition lockout — the burners light, then shut off after a few seconds. Replacing it with this OEM sensor restores reliable flame proving.

Specifications

Part Number: 0130F00010S
Type: Flame rectification sensor (flame rod)
Function: Proves flame presence to the ignition control board
Signal: Microamp flame-rectification current
Mounting: Single-screw bracket at the burner assembly
Fits: Goodman VMSS960803BNAA and compatible furnaces

OEM vs. Generic

This genuine Goodman OEM sensor uses the correct rod alloy and length to deliver a stable flame-signal current the board can read. Generic sensors often produce a weak or erratic microamp reading that triggers repeat lockouts. For dependable ignition, OEM is the smart choice.

Installation Difficulty

Easy (1 of 3). One mounting screw and a single spade connector. Turn off power, remove the old rod, and avoid touching the new sensor's metal surface with bare fingers. A quick five-minute repair for most DIYers.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for VMS...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman VMSS960803BNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman VMSS960803BNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman VMSS960803BNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu