What are the specs for this Flame Sensor?

The correct replacement for Goodman model VMES960804CNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number VMES960804CNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for VMES960804CNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for VMES960804CNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13647
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-13647 Brand: Goodman

$26.95 $34.99

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

OEM Goodman 0130F00010S Flame Sensor

This genuine Goodman 0130F00010S flame sensor is the flame-rectification rod that proves the presence of a burner flame on the VMES960804CNAA gas furnace. The control board sends a micro-amp signal through the rod; if no flame current is detected, the board shuts the gas valve for safety. A dirty, oxidized, or cracked flame sensor is the single most common cause of a furnace that lights briefly then shuts off (short-cycling) or drops into ignition lockout.

Specifications

Type: Flame rectification sensor rod
Function: Proves burner flame; enables continued gas flow
Signal: Micro-amp flame current to ignition control
Fits: Goodman/Amana VMES960804CNAA and compatible furnaces
Replaces OEM part: 0130F00010S

OEM vs. Generic

The OEM sensor uses Goodman's exact rod length, alloy, and ceramic insulator so it positions correctly in the flame and produces a reliable flame-current signal. Generic rods may sit too high or low in the flame or use lower-grade alloys, leading to intermittent faults. For consistent ignition, OEM is preferred.

Installation Difficulty

Easy — typically one mounting screw and a single wire connector. Shut off power, remove the old sensor, and install the new one; avoid touching the rod with bare fingers. A 10–15 minute job for most DIYers. Tip: if replacing due to short-cycling, also inspect the burner and manifold.

Disconnect power before servicing and verify model/serial compatibility.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for VME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman VMES960804CNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman VMES960804CNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman VMES960804CNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu