What are the specs for this Flame Sensor?

The correct replacement for Goodman model VDS80804BXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number VDS80804BXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for VDS80804BXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for VDS80804BXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13537
Price: 32.95 USD
Availability: InStock

SKU: GOODMAN-13537 Brand: Goodman

$32.95 $42.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a factory-original flame sensor (flame rectification rod) for the Goodman/Amana VDS80804BXAA gas furnace. This sensor confirms that the burners have actually lit after ignition; if it doesn't detect a flame within a few seconds, the control board shuts off the gas valve for safety. A dirty, oxidized, or cracked flame sensor is one of the most common causes of a furnace that lights briefly then shuts down (short-cycling). Installing a fresh OEM sensor restores reliable, safe ignition.

Specifications

Part type: Flame sensor / flame rectification rod
Function: Verifies burner flame presence for safe gas control
Fits model: Goodman/Amana VDS80804BXAA and compatible 80% AFUE furnaces
Construction: Kanthal sensing rod with ceramic insulator
OEM part number: 0130F00010S

OEM vs. Generic

Generic flame rods can have the wrong rod length or insulator geometry, producing a weak microamp signal and nuisance lockouts. This genuine OEM Goodman sensor delivers the correct flame-rectification current the control board expects, for consistent, code-compliant operation.

Installation Difficulty

Easy (DIY-friendly). Cut power, remove one mounting screw, unplug the wire lead, and swap in the new sensor — roughly 10–15 minutes. Avoid touching the rod with bare fingers, and never sand a new sensor. If your issue persists after replacement, have the gas valve and control board checked by a technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for VDS...

$32.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman VDS80804BXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman VDS80804BXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman VDS80804BXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu