What are the specs for this Flame Sensor?

The correct replacement for Goodman model VDS80603ANAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number VDS80603ANAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for VDS80603ANAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for VDS80603ANAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S flame sensor is a genuine OEM flame-rectification rod for the VDS80603ANAA gas furnace. This sensor confirms that the burners actually lit after the igniter fires: it passes a micro-amp rectified current through the flame to the control board, which keeps the gas valve open only while a valid flame is detected. When the sensor becomes coated in oxide or fails, the furnace ignites and then shuts down within seconds — a classic short-cycling / no-heat symptom that a fresh sensor resolves.

Specifications

OEM Part Number: 0130F00010S
Part Type: Flame sensor / flame rectification rod
Signal: Micro-amp flame current to ignition control
Material: High-temperature rod with ceramic insulator
Fits: Goodman VDS80603ANAA furnace

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, mounting bracket, and terminal so it sits precisely in the flame and reads a strong, stable signal. Generic sensors that sit too shallow or use a different insulator produce weak, drifting flame current and repeat lockouts. For reliable ignition, the factory sensor is worth it.

Install Difficulty: Easy (2/5)

Shut off power and gas. The sensor mounts to the burner assembly with a single screw and one push-on wire. Remove the old rod, install the new 0130F00010S, and reconnect the lead. Avoid touching the rod tip with bare fingers. Restore power and confirm the furnace lights and stays running through a full heat cycle. Typical replacement time is 10–15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for VDS...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman VDS80603ANAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman VDS80603ANAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman VDS80603ANAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu