What are the specs for this Flame Sensor?

The correct replacement for Goodman model VCSS961005CNAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number VCSS961005CNAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for VCSS961005CNAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for VCSS961005CNAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13492
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-13492 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor rod built as an exact-fit replacement for the VCSS961005CNAA 96% AFUE two-stage furnace. The flame sensor uses flame rectification to confirm the burners have lit; when the rod becomes coated with oxidation or carbon, the control board can't detect flame and locks out the furnace — the classic symptom of a furnace that lights for a few seconds then shuts off, repeating several times before a hard lockout.

Specifications

Type: Flame rectification sensor rod
Part number: 0130F00010S
Fits: Goodman VCSS961005CNAA and compatible furnaces
Terminal: Single spade connection
Function: Flame proving / safety

OEM vs. Generic

The OEM Goodman flame sensor matches the exact rod length, bend, and mounting bracket needed for correct positioning in the flame. Generic sensors often require bending or adapting, which can produce a weak microamp signal and nuisance lockouts. OEM gives a reliable, correct signal out of the box.

Installation Difficulty

Easy — one of the most common DIY furnace repairs. Cut power, remove one screw and one wire, and swap the rod. Avoid touching the sensing surface with bare fingers. A furnace tech can also verify the flame-sense microamp reading after install.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for VCS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman VCSS961005CNAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman VCSS961005CNAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman VCSS961005CNAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu