Product Name
$0.00
✅ In Stock
🚚 Ships Today
🔒 OEM Certified
🔄 30-Day Return
Same-day dispatch if ordered by 3PM CST
Free shipping on orders $75+
Check compatibility before ordering
IMAGE COMING SOON
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the VCES960804CNAA gas furnace and compatible Goodman/Amana models. Mounted in the burner flame path, it generates a tiny micro-amp current that proves a flame is present after ignition. If the control board does not detect that signal, it closes the gas valve within seconds — a critical safety function. A dirty, oxidized, or cracked flame sensor is the single most common cause of furnace short-cycling and intermittent ignition lockouts.
OEM vs. Generic: The OEM 0130F00010S matches the exact rod length, bend, and mounting bracket for correct positioning in the flame — placement matters, since a rod that sits too high or low won't rectify reliably. A generic universal sensor costs less and can work, but may require bending or bracket adaptation to achieve proper flame contact.
Install difficulty: Easy (1/5). A classic 10-minute repair. Kill power at the switch, pull the single spade wire, remove one mounting screw, and install the new sensor. While you're in there, it's good practice to lightly clean the surrounding burner area. Restore power and confirm the furnace lights and stays lit through a full cycle.