What are the specs for this Flame Sensor?

The correct replacement for Goodman model GSU080-4 — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GSU080-4 — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GSU080-4 — 0130F00010S

Name: OEM Goodman Flame Sensor for GSU080-4 — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13000
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-13000 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S Flame Sensor is a direct-fit replacement engineered for the Goodman GSU080-4 gas furnace. The flame sensor confirms the presence of a flame during ignition by conducting a micro-amp rectification current back to the control board. When it becomes coated in oxide or cracks, the board fails to "see" the flame and shuts the burners down within seconds — the classic symptom of a furnace that lights, runs briefly, then drops out and locks on error. Replacing this inexpensive part is one of the most common fixes for intermittent no-heat calls.

Specifications

OEM Part Number: 0130F00010S
Part Type: Flame sensor / flame rectification rod
Fits Model: Goodman GSU080-4 gas furnace
Brand: Goodman (OEM)
Function: Flame proving via micro-amp rectification

OEM vs. Generic

This is the OEM Goodman component built to factory tolerances, so the rod length, ceramic insulator, and terminal position match the burner assembly exactly — no bending or shimming to get a stable flame signal. Universal aftermarket sensors are cheaper but often read a weaker or noisier micro-amp current, leading to repeat nuisance lockouts. For a reliable, long-lasting repair we recommend the OEM part.

Installation Difficulty

Easy (1/5). A single mounting screw and one push-on connector. Cut furnace power first, gently clean or swap the sensor, and reconnect. Most homeowners complete this in 10-15 minutes with a nut driver. If lockouts persist after replacement, inspect the wiring and control board.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GSU...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GSU080-4 — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GSU080-4 — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GSU080-4 — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu