What are the specs for this Flame Sensor?

The correct replacement for Goodman model GSU060-3 Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GSU060-3 Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GSU060-3 Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GSU060-3 Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-12988
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-12988 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is the OEM flame-rectification rod for the GSU060-3 gas furnace. It verifies that the burner has ignited and signals the control board to hold the gas valve open. As the rod's tip oxidizes with age, the microamp signal drops and the furnace lights only to shut off seconds later — the familiar short-cycle and flame-loss lockout complaint. Installing a new sensor is the quickest and least expensive fix for these symptoms.

Specifications

Function: Flame rectification sensor rod
Fits: Goodman GSU060-3 furnace
OEM Part Number: 0130F00010S
Material: Kanthal rod with ceramic insulator
Equipment Type: Gas furnace

OEM vs. Generic

The OEM 0130F00010S provides the correct rod length and mounting bracket so the tip lands precisely in the GSU060-3 burner flame. Our generic flame sensor rod offers the same rectification function at a lower cost, but bracket fit should be confirmed during install. For a guaranteed drop-in, go OEM.

Installation Difficulty

Easy (1/5). Turn off power, remove one mounting screw, disconnect the spade terminal, and reverse the steps with the new rod. Clean the flame path and handle the sensor by its ceramic base only. About 10 minutes start to finish.

Compatible with Goodman GSU060-3 furnaces. Verify your existing part number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GSU...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GSU060-3 Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GSU060-3 Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GSU060-3 Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu