What are the specs for this Flame Sensor?

The correct replacement for Goodman model GSMS100-4 Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GSMS100-4 Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GSMS100-4 Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GSMS100-4 Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-12986
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-12986 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is the OEM flame-rectification rod for the GSMS100-4 gas furnace. It confirms the burner has lit and tells the control board to keep the gas valve open. When the sensor's tip oxidizes or the rod cracks, the furnace ignites and then shuts down within seconds — the classic short-cycle and flame-loss lockout. A fresh sensor is the fastest, lowest-cost cure for these faults.

Specifications

Function: Flame rectification sensor rod
Fits: Goodman GSMS100-4 furnace
OEM Part Number: 0130F00010S
Material: Kanthal rod with ceramic insulator
Equipment Type: Gas furnace

OEM vs. Generic

The OEM 0130F00010S uses the exact rod length and mounting bracket for the GSMS100-4 burner assembly, ensuring the tip sits in the correct part of the flame. Our generic flame sensor rod delivers the same rectification performance at a lower price, though bracket alignment should be checked on install. Choose OEM for a guaranteed drop-in fit.

Installation Difficulty

Easy (1/5). Cut power, remove the single mounting screw, unplug the spade connector, and reverse to install. Wipe the flame path clean and avoid touching the new rod with bare fingers. Replacement takes about 10 minutes.

Compatible with Goodman GSMS100-4 furnaces. Verify your existing part number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GSM...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GSMS100-4 Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GSMS100-4 Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GSMS100-4 Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu