What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMPV100-5 Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMPV100-5 Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMPV100-5 Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMPV100-5 Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-12156
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-12156 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is the genuine OEM flame-rectification rod used to confirm burner ignition on GMPV100-5 gas furnaces. The control board reads the microamp signal generated by this rod through the flame; when the signal drops—usually from oxidation or carbon buildup—the furnace short cycles, locks out, or fails to stay lit. Replacing a worn sensor is one of the most common and effective fixes for intermittent no-heat calls.

Specifications

Part Number: 0130F00010S
Component: Flame-rectification sensor rod
Function: Proves flame presence to the ignition control
Compatibility: Goodman GMPV100-5 furnace (verify by OEM part number)
Mounting: Single-screw bracket with spade terminal lead

OEM vs. Generic

The OEM Goodman sensor uses the correct rod length, alloy, and insulator rating so the flame signal matches the control board's threshold. Generic rods can produce weak or unstable microamp readings, causing nuisance lockouts even when the burner is lit. Genuine parts eliminate guesswork on flame-proving faults.

Installation Difficulty: Easy

Rated Easy. Cut power, remove the single mounting screw, unplug the spade connector, and install the replacement. Avoid touching the rod with bare fingers. A 10–15 minute job for most technicians and handy homeowners.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMP...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMPV100-5 Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMPV100-5 Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMPV100-5 Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu