What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMPV100-3 Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMPV100-3 Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMPV100-3 Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMPV100-3 Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-12146
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-12146 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement for the GMPV100-3 furnace and compatible Goodman/Amana gas models. The flame sensor (flame rod) confirms the presence of a burner flame during ignition; if it fails to detect flame, the control board shuts off the gas valve as a safety measure — often causing repeated short cycling or ignition lockout.

Specifications

OEM Part Number: 0130F00010S
Part Type: Flame Sensor / Flame Rod
Brand: Goodman
Equipment: Gas Furnace
Primary Fit: GMPV100-3
Construction: Kanthal rod with ceramic insulator

Symptoms of a Bad Flame Sensor

Furnace lights then shuts down after a few seconds, repeated ignition retries, or the blower running without heat. A dirty or oxidized sensor is one of the most common no-heat calls.

OEM vs. Generic

The OEM Goodman 0130F00010S matches the original rod length, mounting bracket, and terminal for guaranteed fit and reliable microamp signal. A generic equivalent provides a lower-cost fix with similar performance; confirm the mounting hole spacing before ordering. OEM is preferred for precise flame-rectification signal strength.

Installation Difficulty: Easy

Turn off power and gas, remove the single mounting screw, disconnect the sensor wire, and install the new rod. Estimated time: 10–15 minutes. Avoid touching the rod tip with bare fingers. A great DIY-friendly repair, though professional service is recommended for gas equipment.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMP...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMPV100-3 Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMPV100-3 Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMPV100-3 Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu