What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMPE100-4A — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMPE100-4A — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMPE100-4A — 0130F00010S

Name: OEM Goodman Flame Sensor for GMPE100-4A — 0130F00010S
Brand: Goodman
SKU: GOODMAN-11982
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-11982 Brand: Goodman

$26.95 $34.99

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the Goodman/Amana GMPE100-4A gas furnace. It confirms the presence of a burner flame within seconds of ignition; if it fails to detect flame, the control board closes the gas valve as a safety measure. A dirty, corroded, or failed flame sensor is one of the most common causes of furnace short-cycling and intermittent no-heat calls.

Specifications

Type: Flame rectification sensor (flame rod)
Function: Verifies burner flame for safe operation
Fits: Goodman & Amana GMPE100-4A and compatible furnaces
OEM Part Number: 0130F00010S
Equipment: Gas Furnace

OEM vs. Generic

OEM sensors use the correct rod length, alloy, and mounting geometry so the flame envelopes the rod exactly as the control board expects, producing a stable microamp signal. Generic rods that sit too high or use lower-grade metal often generate weak or erratic signals, leading to nuisance lockouts. For reliable ignition, OEM is the safer choice.

Installation Difficulty: Easy

One mounting screw and a single spade connector. This is one of the most DIY-friendly furnace repairs — typically 10–15 minutes. Shut off power and gas before servicing. Tip: if your existing sensor is only lightly corroded, cleaning it with fine abrasive pad can restore function, but a cracked or heavily pitted rod should always be replaced.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMP...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMPE100-4A — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMPE100-4A — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMPE100-4A — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu