What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMPE075-3A Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMPE075-3A Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMPE075-3A Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMPE075-3A Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-11957
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-11957 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a factory-original flame sensor designed for the GMPE075-3A gas furnace and compatible Goodman/Amana units. This flame-rectification rod confirms to the control board that a flame is actually present after ignition. A weak or contaminated sensor is one of the most common causes of furnace short cycling and intermittent no-heat lockouts, making this an essential wear item.

Specifications

Part type: Flame sensor / flame-rectification rod
Sensing method: Microamp flame rectification
Compatible model: Goodman GMPE075-3A
Connection: Single spade terminal with mounting bracket
Equipment: Gas furnace
OEM part number: 0130F00010S

OEM vs. Generic

The genuine OEM Goodman sensor provides the correct rod length, alloy, and bracket alignment so it sits precisely in the flame envelope and returns a stable microamp signal. Generic flame rods can mis-position in the flame or produce a marginal signal, leading to repeat lockouts. For reliable ignition proving, OEM is the safer investment.

Installation Difficulty

Easy (DIY-friendly). Typically a 10–15 minute job: cut power, remove the single mounting screw, unplug the spade wire, and install the replacement. While you are in there, it is good practice to lightly clean adjacent components. Avoid touching the new rod with bare fingers. If comfortable, most homeowners can complete this; otherwise call a licensed technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMP...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMPE075-3A Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMPE075-3A Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMPE075-3A Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu