What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMNT120-5 Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMNT120-5 Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMNT120-5 Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMNT120-5 Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-11747
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-11747 Brand: Goodman

$26.95 $35.05

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the GMNT120-5 gas furnace. This sensor confirms the presence of a burner flame during each heating cycle; when it fails or becomes coated with oxide, the control board shuts off the gas valve, producing symptoms like short-cycling, lockout after a few seconds of flame, or a complete no-heat condition.

Specifications

Type: Flame rectification sensor (single rod)
Function: Burner flame proving / safety verification
Signal: Microamp DC flame current to the ignition control
Fit: Goodman/Amana GMNT120-5 and compatible furnace platforms
Material: High-temperature rod with ceramic insulator

OEM vs. Generic

Genuine OEM 0130F00010S ensures the correct rod length, angle, and insulator rating for proper flame immersion and a strong microamp signal. Universal flame sensors often require bending or adapting, and a poorly positioned rod leads to weak signal and repeat lockouts. OEM fit means it works the first time.

Installation Difficulty

Easy (DIY-friendly). One mounting screw and a single push-on wire. Power off at the breaker, remove the old sensor, and install the new rod without touching the metal rod with bare fingers (skin oils can foul it). If a furnace is short-cycling, replacing this inexpensive part is the standard first fix.

Compatible with GMNT120-5. Verify original part number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMN...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMNT120-5 Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMNT120-5 Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMNT120-5 Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu