What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMNT080-4 Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMNT080-4 Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMNT080-4 Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMNT080-4 Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-11679
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-11679 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for GMNT080-4 gas furnaces and compatible Goodman/Amana models. The sensor confirms the burner flame is present so the control board keeps the gas valve open. When the rod oxidizes or cracks, the furnace lights briefly then shuts down — the classic short-cycle / flame-loss lockout. Installing a fresh OEM sensor restores stable, continuous heating cycles.

Specifications

Type: Flame sensor / flame-rectification rod
Fits: Goodman GMNT080-4 and select Goodman/Amana furnaces
Function: Verifies burner flame via micro-amp rectification signal
Mounting: Single-screw bracket with spade terminal
OEM Part Number: 0130F00010S
Brand: Goodman (OEM)

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length and bracket angle so the tip sits properly in the flame for a strong microamp signal. Generic rods may sit too shallow and read weak flame. Choose OEM for reliable flame proving.

Install Difficulty

Easy (2/5) — Shut off gas and power, remove the burner door, pull the spade connector, remove one mounting screw, and swap in the new sensor. Avoid touching the rod with bare hands. About 10–15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMN...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMNT080-4 Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMNT080-4 Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMNT080-4 Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu