What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMN100-4 Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMN100-4 Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMN100-4 Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMN100-4 Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-11585
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-11585 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Restore dependable ignition to your Goodman GMN100-4 gas furnace with the genuine OEM 0130F00010S flame sensor. The flame sensor (flame rod) confirms that the burners have lit and generates the microamp signal the control board needs to keep the gas valve open. When it fails, the furnace typically lights briefly then shuts down on a flame-proving lockout, cycling repeatedly without producing steady heat.

Specifications

OEM Part Number: 0130F00010S
Part Type: Flame Sensor / Flame Rod
Brand: Goodman
Fits Model: GMN100-4 (gas furnace)
Function: Flame rectification / flame proving
Material: High-temperature stainless steel rod with ceramic insulator

OEM vs. Generic

The OEM Goodman 0130F00010S is the factory-specified rod with exact mounting geometry and rod length for correct flame immersion — the safest, longest-lasting choice. Our generic replacement is a lower-cost, functionally equivalent flame sensor that fits the same bracket and works well for budget-minded repairs. Both restore proper flame signal.

Installation Difficulty

Easy (1 of 5). A 15-minute repair for most homeowners: cut power, remove the single mounting screw, unplug the spade wire, and swap the sensor. Lightly clean any new corrosion and avoid touching the rod with bare fingers. Always shut off gas and electrical power before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMN...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMN100-4 Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMN100-4 Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMN100-4 Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu