What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMH950905DXAE Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMH950905DXAE Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMH950905DXAE Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMH950905DXAE Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-11470
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-11470 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement designed for the GMH950905DXAE 95% AFUE gas furnace. This flame rectification rod verifies the presence of a burner flame during ignition and steady-state operation. When it fails or becomes coated with oxidation, the furnace typically lights briefly then shuts down on a flame-sense fault — replacing the sensor restores dependable heating.

Specifications

OEM Part Number: 0130F00010S
Type: Single-rod flame rectification sensor
Fits: Goodman GMH950905DXAE furnace
Material: Kanthal rod with ceramic insulator
Mounting: Direct bolt-on replacement
Compatible equipment: 95% AFUE two-stage gas furnaces

OEM vs. Generic

Our OEM sensor matches Goodman's exact rod length, insulator geometry, and terminal so it seats correctly and reads a clean microamp signal every cycle. Generic aftermarket sensors are lower cost but can vary in rod length and signal strength, sometimes causing intermittent flame-sense lockouts. For furnaces still in service we recommend the OEM part.

Installation Difficulty

Easy (1/5) — Remove one screw, unplug the sensor lead, and swap. No special tools required. Always shut off power and gas before servicing. Most homeowners complete this in under 15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMH...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMH950905DXAE Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMH950905DXAE Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMH950905DXAE Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu