What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMH950905DXAD Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMH950905DXAD Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMH950905DXAD Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMH950905DXAD Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-11458
Price: 42.95 USD
Availability: InStock

SKU: GOODMAN-11458 Brand: Goodman

$42.95 $54.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

Stop nuisance short-cycling and flame-loss lockouts with this genuine OEM Goodman 0130F00010S flame sensor for the GMH950905DXAD furnace. The flame sensor uses flame rectification to confirm the burners actually lit after ignition. When the sensor rod becomes coated with oxidation or its microamp signal drops, the control board closes the gas valve within seconds as a safety measure — the classic "lights then shuts off" symptom. A fresh OEM sensor restores a strong, reliable flame signal.

Part number: 0130F00010S
Function: Flame rectification / proving sensor
Fits: Goodman GMH950905DXAD
Design: Factory rod length, angle, and terminal
Signal: Reliable microamp output for board detection

OEM vs. Generic

Universal flame sensors often have the wrong rod length or bend, placing the tip outside the flame envelope and producing a weak, drifting signal that leads to intermittent lockouts. This OEM sensor positions the rod exactly where Goodman intended for a stable flame-current reading every cycle.

Install Difficulty: Easy (1/5)

One of the simplest furnace repairs — about 10 minutes. Cut power, remove the single mounting screw, unplug the sensor wire, and install the new sensor in the same orientation. Avoid touching the ceramic insulator with bare fingers. Restore power and confirm the burners stay lit through a complete heat cycle. Tip: gently cleaning a working sensor with fine abrasive pad can extend life, but a worn rod should simply be replaced.

Genuine Goodman replacement — exact fit for the GMH950905DXAD.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMH...

$42.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMH950905DXAD Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMH950905DXAD Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMH950905DXAD Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu