What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMH950453BXAE Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMH950453BXAE Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GMH950453BXAE Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GMH950453BXAE Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-11142
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-11142 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the GMH950453BXAE 95% AFUE furnace. It confirms the burner has lit by sensing the micro-amp flame-rectification current; when the sensor is dirty or failed, the control board reads no flame and shuts the gas valve, causing short-cycling and no-heat calls.

Specifications

Part Type: Flame sensor / flame rectification rod
OEM Part Number: 0130F00010S
Fits Model: GMH950453BXAE (GMH95 series)
Equipment: High-efficiency gas furnace
Signal: Micro-amp flame rectification
Fit: Direct OEM replacement

OEM vs. Generic

The OEM 0130F00010S has the exact rod length, ceramic insulator, and mounting bracket to sit correctly in the burner flame — the position determines a stable flame signal. Generic sensors often mount off-angle and produce a weak signal, mimicking the very failure you replaced it to fix. OEM is the reliable choice here.

Installation Difficulty

Easy. Remove one screw, unplug the wire lead, and swap. About 10-15 minutes. Do not touch the rod with bare fingers, and avoid over-tightening the ceramic base. Shut off gas and power before service.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMH950453BXAE Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMH950453BXAE Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMH950453BXAE Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu