What are the specs for this Flame Sensor?

The correct replacement for Goodman model GKS90905DXAF Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GKS90905DXAF Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GKS90905DXAF Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GKS90905DXAF Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10906
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-10906 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S flame sensor is a genuine OEM replacement for the GKS90905DXAF gas furnace. The flame sensor confirms that the burners have ignited by generating a micro-amp rectification signal to the control board. When it becomes coated in oxide or fails, the furnace lights briefly then shuts down — the classic short-cycle / no-heat lockout. Replacing this inexpensive part is one of the most common and effective furnace repairs.

Specifications

Part Number: 0130F00010S
Type: Flame sensor / flame rectification rod
Brand: Goodman (Amana / Daikin compatible)
Equipment: High-efficiency gas furnace
Primary Fit: GKS90905DXAF
Signal: Micro-amp flame rectification to control board

OEM vs. Generic

This genuine Goodman OEM sensor uses the correct rod alloy and bracket angle for reliable flame proving. Generic sensors may sit at the wrong depth in the flame envelope, producing a weak signal and intermittent lockouts. For dependable ignition, the OEM part is the right choice.

Installation Difficulty

Easy (1/5). Turn off power, remove one mounting screw, unplug the single wire lead, and swap. Takes about 10 minutes. Tip: gently clean the surrounding burner area and never sand a new sensor — handle it by the ceramic base only.

Verify the part number on your furnace nameplate before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GKS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GKS90905DXAF Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GKS90905DXAF Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GKS90905DXAF Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu