What are the specs for this Flame Sensor?

The correct replacement for Goodman model GKS90904CXAF — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GKS90904CXAF — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GKS90904CXAF — 0130F00010S

Name: OEM Goodman Flame Sensor for GKS90904CXAF — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The genuine OEM Goodman 0130F00010S flame sensor is a direct-fit replacement for GKS90904CXAF gas furnaces and compatible Goodman, Amana, and Daikin equipment. The flame sensor (flame rod) sits in the burner flame and uses flame rectification to confirm to the control board that the burners have actually lit. When the sensor is coated with oxide or has failed, the board sees no flame signal and shuts the gas valve within seconds — producing the classic symptom of a furnace that lights, runs for 3–7 seconds, then drops out and re-tries or locks out.

Specifications

OEM Part Number: 0130F00010S
Type: Single-rod flame sensor (flame rectification)
Function: Proves burner flame to the ignition control
Equipment: Gas furnace (Goodman GKS90904CXAF and compatible)
Mounting: Single screw with spade terminal

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, bend, and mounting bracket so it seats precisely in the flame path for a strong microamp signal. Generic flame sensors often require bending the rod to position, which weakens the sense current and shortens service life. For reliable ignition, the OEM rod is the safer choice.

Installation Difficulty

Easy (1 of 5). Cut power at the disconnect, pull the single spade wire, remove one screw, and swap the sensor. Before condemning an old sensor, try gently cleaning the rod with fine steel wool or a Scotch-Brite pad — if the furnace still short-cycles after cleaning, replace it with this OEM unit. Typical job time is 10 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GKS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GKS90904CXAF — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GKS90904CXAF — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GKS90904CXAF — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu