What are the specs for this Flame Sensor?

The correct replacement for Goodman model GDT070-3A Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GDT070-3A Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GDT070-3A Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GDT070-3A Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10430
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-10430 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement part engineered for the Goodman GDT070-3A gas furnace and compatible Goodman/Amana models. The flame sensor is a critical safety component that confirms a flame is present after ignition. When it becomes coated with oxide or corrosion, the furnace will light briefly and then shut down (short cycling), leaving your home without heat. Installing this factory part restores dependable flame rectification and consistent furnace operation.

Specifications

OEM Part Number: 0130F00010S
Part Type: Flame Sensor / Flame Rod
Fits: Goodman GDT070-3A gas furnace
Brand: Goodman (also fits many Amana units)
Function: Flame rectification / proof-of-flame detection
Equipment: Gas Furnace

OEM vs. Generic

This is the genuine OEM Goodman sensor, built to the exact rod length, mounting geometry, and terminal spec your furnace's control board expects. Aftermarket generics often use a different rod alloy or bracket angle, which can cause weak microamp signals and nuisance lockouts. For a safety component like flame detection, we recommend the OEM part for guaranteed fit and reliable microamp output.

Installation Difficulty

Easy (1 of 5). A single mounting screw and one spade connector. Always shut off power and gas before servicing. Gently clean or replace, reseat the wire, and restore power. Typical job time is 10–15 minutes for a DIY homeowner.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GDT...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GDT070-3A Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GDT070-3A Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GDT070-3A Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu