What are the specs for this Flame Sensor?

The correct replacement for Goodman model GDS80703ANA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GDS80703ANA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GDS80703ANA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GDS80703ANA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10301
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-10301 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor (flame rectification rod) engineered for the GDS80703ANA gas furnace. The flame sensor sits in the burner flame and confirms ignition to the control board using a micro-amp rectification current. When the rod becomes oxidized, cracked, or coated with carbon, the board no longer 'sees' the flame and shuts the gas valve within seconds — the classic symptom of a furnace that lights, runs briefly, then shuts off and short-cycles repeatedly.

Specifications

OEM Part Number: 0130F00010S
Type: Single-rod flame rectification sensor
Function: Proves flame presence to the ignition control
Fits: Goodman GDS80703ANA and compatible 80% AFUE furnaces
Equipment: Gas furnace flame-proving control

OEM vs. Generic

This genuine Goodman OEM sensor uses the correct rod length, ceramic insulator, and mounting bracket for a proper flame position — critical for a stable rectification signal. Generic universal rods exist and can work, but incorrect rod geometry often produces a weak micro-amp reading and recurring lockouts. The factory part removes that guesswork.

Installation

Difficulty: Easy (DIY-friendly, ~10–15 minutes). Turn off power and gas. Remove the single mounting screw, disconnect the sensor wire, and install the new rod — never touch the metal rod with bare fingers, as oils can foul it. While you're in there, inspect and gently clean the burner area. If the furnace still short-cycles with a fresh sensor, check the ground connection and control board.

Genuine OEM replacement. Verify your model and old part number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GDS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GDS80703ANA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GDS80703ANA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GDS80703ANA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu