What are the specs for this Flame Sensor?

The correct replacement for Goodman model GDH80403ANBA Gas Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GDH80403ANBA Gas Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GDH80403ANBA Gas Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GDH80403ANBA Gas Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10164
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-10164 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification sensor for the Goodman GDH80403ANBA and compatible Goodman/Amana gas furnaces. The sensor rod confirms to the control board that a flame is present after ignition; when it becomes coated, corroded, or cracked, the furnace lights and then shuts down within seconds — the classic short-cycling / no-heat symptom. Installing a clean OEM sensor restores a strong, stable microamp flame signal and reliable heating.

Part type: Flame sensor / flame-rectification rod
OEM part number: 0130F00010S
Brand: Goodman / Amana
Primary fit: GDH80403ANBA gas furnace
Function: Verifies flame presence to the ignition control board
Terminal: Single spade / ceramic-insulated rod

OEM vs. Generic

The genuine Goodman OEM sensor uses the correct rod length, alloy, and ceramic insulator to deliver a flame-current reading the control board expects (typically a few microamps). Generic rods can produce a weak or unstable signal that trips lockout even when the flame is fine. For a component your furnace checks on every cycle, OEM reliability is worth the small premium.

Install Difficulty

Easy (1/5). One mounting screw and a single push-on wire. Cut power at the breaker, remove the old rod, and seat the new sensor so the tip sits in the flame path. Avoid touching the rod with bare fingers. Total time is usually under ten minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GDH...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GDH80403ANBA Gas Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GDH80403ANBA Gas Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GDH80403ANBA Gas Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu