What are the specs for this Flame Sensor?

The correct replacement for Goodman model GCV91155DXBA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GCV91155DXBA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GCV91155DXBA — 0130F00010S

Name: OEM Goodman Flame Sensor for GCV91155DXBA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10116
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-10116 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame rod built for the Goodman GCV91155DXBA gas furnace. The flame sensor confirms that a flame is present after ignition by generating a small microamp rectification signal back to the control board. A corroded, cracked, or oxidized sensor is the single most common cause of furnace short cycling and no-heat lockouts — the board shuts the gas valve within seconds when it can't verify flame. Replacing it with an exact-match OEM sensor restores reliable, safe operation.

Specifications

OEM Part Number: 0130F00010S
Part Type: Flame sensor / flame rectification rod
Fits Model: Goodman GCV91155DXBA gas furnace
Function: Verifies flame presence, enables continued gas flow
Brand: Goodman (OEM)

OEM vs. Generic

This genuine Goodman OEM sensor matches the exact rod length, bracket angle, and terminal type of your furnace. Generic sensors frequently sit at the wrong position in the flame envelope, producing weak microamp signals and recurring lockouts. The OEM part drops in and reads correctly the first time.

Installation Difficulty

Easy (1/5). One of the most common DIY furnace repairs — shut off power and gas, remove a single mounting screw, unclip the wire, install the new sensor, and reconnect. Avoid touching the rod with bare fingers. Consult a licensed technician if the fault persists.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GCV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GCV91155DXBA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GCV91155DXBA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GCV91155DXBA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu