What are the specs for this Flame Sensor?

The correct replacement for Goodman model GCH950905DXAD — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GCH950905DXAD — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GCH950905DXAD — 0130F00010S

Name: OEM Goodman Flame Sensor for GCH950905DXAD — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10057
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-10057 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor (flame rod) built for the GCH950905DXAD gas furnace and compatible Goodman/Amana models. The flame sensor confirms burner ignition by detecting flame rectification current; if it fails or becomes coated, the control board shuts off the gas valve as a safety measure — the classic cause of short cycling and no-heat lockouts.

Specifications

Type: Single-rod flame rectification sensor
Signal: Micro-amp flame current to ignition control
Material: High-temperature alloy rod with ceramic insulator
Function: Proves burner flame, enables safe gas valve operation
Fits: Goodman GCH950905DXAD and related furnaces
Part Number: 0130F00010S

OEM vs. Generic

Genuine OEM flame rods use the correct rod length, alloy, and bracket geometry, positioning the tip precisely in the flame for a stable micro-amp signal. Cheap generics often sit at the wrong depth, produce weak signals, and fail early. OEM restores reliable ignition and long service life.

Installation Difficulty: Moderate (2/5)

A common DIY repair. Shut off gas and power, remove one mounting screw and the sensor wire, then install the new rod. Gentle handling of the ceramic base is important. If you're uncomfortable working near the burner assembly, contact a licensed technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GCH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GCH950905DXAD — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GCH950905DXAD — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GCH950905DXAD — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu