What are the specs for this Flame Sensor?

The correct replacement for Goodman model GCH950703BXAD — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GCH950703BXAD — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GCH950703BXAD — 0130F00010S

Name: OEM Goodman Flame Sensor for GCH950703BXAD — 0130F00010S
Brand: Goodman
SKU: GOODMAN-9908
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-9908 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for GCH950703BXAD gas furnaces and compatible Goodman/Amana models. It confirms the burner has lit by sensing the micro-amp flame-rectification current; when the rod becomes coated, cracked, or weak, the control board can't verify flame and shuts the gas valve — producing short cycling, ignition lockout, or a furnace that lights briefly then quits.

Specifications

Type: Single-rod flame sensor (flame rectification)
Function: Proves burner flame to the ignition control
Material: High-temperature Kanthal rod with ceramic insulator
Fit: Goodman GCH950703BXAD and compatible furnaces
OEM Part Number: 0130F00010S

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, bend, and mounting so it sits properly in the flame envelope for a strong, stable signal. Generic flame sensors cost less and often physically fit, but variations in rod position or alloy can yield a marginal micro-amp reading that causes intermittent lockouts. For a furnace you rely on through winter, the OEM sensor delivers the most dependable flame signal.

Installation Difficulty: Easy (DIY-friendly)

Roughly 15 minutes. Cut furnace power, remove the single mounting screw, unplug the sensor wire, and install the new 0130F00010S — handling the rod by its base only, never touching the sensing element. Restore power and confirm the burner stays lit through a full cycle. Tip: if you're troubleshooting short cycling, always try cleaning or replacing this sensor first — it's the single most common cause.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GCH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GCH950703BXAD — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GCH950703BXAD — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GCH950703BXAD — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu