What are the specs for this Flame Sensor?

The correct replacement for Goodman model GCH950703BXAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GCH950703BXAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GCH950703BXAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GCH950703BXAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-9884
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-9884 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the Goodman GCH950703BXAB 95% AFUE gas furnace and compatible GCH95 models. The flame sensor confirms the burner has ignited by passing a micro-amp rectified current through the flame; when the rod becomes oxidized, cracked, or coated, the control board shuts the gas valve and the furnace short-cycles or fails to heat. Replacing this inexpensive part is the most common fix for a Goodman furnace that lights briefly then shuts off.

Specifications

OEM Part Number: 0130F00010S
Category: Flame Sensor / Flame Rectification Rod
Fits: Goodman GCH950703BXAB and compatible GCH95 furnaces
Material: Kanthal/stainless sensing rod with ceramic insulator
Function: Flame proving via micro-amp rectification signal

OEM vs. Generic

Generic flame sensors vary in rod length, insulator standoff, and terminal type, which can place the tip outside the flame envelope and cause weak or intermittent flame signal. The genuine OEM 0130F00010S positions the sensing rod exactly where Goodman calibrated it, delivering a strong, stable micro-amp reading and reliable ignition proving.

Install Difficulty

Easy (1/5). Turn off power and gas, unplug the single sensor wire, remove one mounting screw, and swap in the new sensor. Reconnect and restore power. A 5–10 minute job — no calibration needed. Tip: if you have short cycling, always try replacing this part before more expensive controls.

Restore dependable ignition and end no-heat short-cycling with the exact OEM flame sensor for your Goodman furnace.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GCH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GCH950703BXAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GCH950703BXAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GCH950703BXAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu