What are the specs for this Flame Sensor?

The correct replacement for Goodman model GCH950453BXAC — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GCH950453BXAC — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GCH950453BXAC — 0130F00010S

Name: OEM Goodman Flame Sensor for GCH950453BXAC — 0130F00010S
Brand: Goodman
SKU: GOODMAN-9847
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-9847 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement for the Goodman GCH950453BXAC gas furnace. The flame sensor (flame rod) confirms to the control board that the burners have ignited by measuring the micro-amp current that flows through the flame. When the sensing rod oxidizes or cracks, the board can no longer prove flame and shuts the gas valve within seconds — producing the classic symptom of a furnace that lights, runs briefly, then short-cycles and locks out. Installing a clean OEM sensor is the most common fix for this failure.

Specifications

OEM Part Number: 0130F00010S
Type: Flame Sensor / Flame Rectification Rod
Compatible Model: GCH950453BXAC (Goodman GCH95 95% AFUE gas furnace)
Signal: Micro-amp flame rectification (typ. 1–5 µA sensed)
Brand: Goodman

OEM vs. Generic

The genuine Goodman OEM sensor uses the correct rod length, alloy, and mounting bracket geometry so it sits in the proper flame envelope for a stable signal. Generic rods may sense a weaker current or mount at the wrong depth, leading to intermittent flame-loss faults that are frustrating to diagnose.

Installation Difficulty

Easy (2 of 5). Turn off power and gas, remove the single mounting screw, unplug the sensor wire, and install the new rod. Route the wire clear of hot metal. About 15 minutes with a nut driver. Avoid touching the new rod with bare fingers to prevent contamination.

Restore reliable ignition on your GCH95 furnace with a genuine Goodman flame sensor.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GCH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GCH950453BXAC — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GCH950453BXAC — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GCH950453BXAC — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu