What are the specs for this Flame Sensor?

The correct replacement for Goodman model GCH90905DXAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GCH90905DXAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for GCH90905DXAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for GCH90905DXAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-9763
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-9763 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor (flame rod) for the GCH90905DXAB gas furnace. This component confirms the presence of a burner flame by conducting a microamp rectification signal back to the control board. When the sensor becomes coated in oxide or cracks, the board fails to prove flame and shuts off the gas valve within seconds — the classic symptom of a furnace that lights then short-cycles. Replacing this sensor is one of the most common no-heat fixes.

Specifications

Part number: 0130F00010S
Type: Flame sensor / flame rectification rod
Brand: Goodman (OEM)
Compatible model: GCH90905DXAB and related Goodman/Amana gas furnaces
Signal: Microamp flame rectification to ignition control board

OEM vs. Generic

OEM Goodman sensors use the correct rod alloy, length, and mounting bracket for an accurate, stable flame signal and exact bolt-up. Generic sensors may sit at the wrong depth in the flame, produce weak microamp readings, and cause intermittent lockouts. For a reliable flame-proving circuit, choose OEM.

Installation Difficulty

Easy to Moderate (2 of 5). Turn off gas and power, remove the single mounting screw, unplug the wire lead, and install the new sensor. Do not touch the metal rod with bare fingers. If your furnace still short-cycles after replacement, have a licensed HVAC technician verify the control board and grounding.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for GCH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GCH90905DXAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GCH90905DXAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GCH90905DXAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu