What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVM971005CNBA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVM971005CNBA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVM971005CNBA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVM971005CNBA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-9315
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-9315 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor engineered for the AMVM971005CNBA modulating variable-speed gas furnace and compatible AMVM97 / GMVM97 series models. The flame sensor (flame rod) confirms that the burners have ignited by conducting a microamp rectification signal back to the control board. A dirty, corroded, or failed sensor is the single most common cause of furnaces that light briefly and then shut down (short cycling on flame loss).

Specifications

Type: Single-rod flame rectification sensor
Genuine Goodman / Amana OEM component
Direct-fit mounting bracket and terminal
Stainless steel rod for high-temperature service
Fits: AMVM971005CNBA and compatible AMVM97 furnaces

OEM vs. Generic

The OEM 0130F00010S guarantees exact rod length, bracket geometry, and terminal orientation for a plug-and-play fit and a stable microamp signal. Generic sensors may fit physically but can produce a weak or noisy flame signal, leading to nuisance lockouts. For a mission-critical safety component we recommend OEM.

Installation Difficulty

Easy (1/5) — Two screws and one wire. Power off the furnace, remove the old sensor, gently clean or replace, and reconnect. Most homeowners complete this in under 15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVM971005CNBA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVM971005CNBA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVM971005CNBA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu