What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVM961005DXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVM961005DXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVM961005DXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVM961005DXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-9201
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-9201 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Restore reliable heating with the genuine OEM Goodman 0130F00010S Flame Sensor, built for the AMVM961005DXAA 96% AFUE gas furnace. The flame sensor verifies that the burner has actually ignited by detecting flame rectification current; when it becomes coated or fails, the control board shuts off gas as a safety measure — causing short-cycling, ignition lockouts, and no-heat calls.

Specifications

OEM Part Number: 0130F00010S
Category: Flame Sensor (flame rectification rod)
Fits Model: AMVM961005DXAA (Amana/Goodman 96% AFUE furnace)
Equipment Type: Gas Furnace
Function: Flame proving / safety flame detection
Mount: Single-screw burner-assembly mount, factory terminal

OEM vs. Generic

OEM sensors use the correct rod length, alloy, and insulator rating so the micro-amp flame signal reads within the control board's spec. Generic sensors may sit at the wrong depth in the flame envelope, producing weak or erratic signals that mimic the very failure you're trying to fix. OEM guarantees a clean, in-spec flame reading.

Installation Difficulty

Easy. Typically one mounting screw and a single push-on wire terminal. Shut off power and gas, swap the sensor, and restore. A common 10-minute DIY-friendly repair, though flame-safety work is always best confirmed by a qualified technician.

Compatible across Amana and Goodman furnaces sharing this burner platform. Verify against your unit's rating plate.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVM961005DXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVM961005DXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVM961005DXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu