What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVM960805CXBA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVM960805CXBA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVM960805CXBA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVM960805CXBA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-9189
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-9189 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod built for the AMVM960805CXBA modulating gas furnace. The sensor confirms the presence of a burner flame through microamp flame rectification; if it fails to detect flame within seconds, the control board closes the gas valve as a safety measure. A dirty, corroded, or cracked flame sensor is the single most common cause of furnace short cycling and intermittent no-heat complaints — the burners light, then shut off moments later.

Specifications

Part number: 0130F00010S
Type: Flame sensor / flame-rectification rod
Function: Verifies burner ignition for the gas-valve safety circuit
Fits: Goodman/Amana AMVM960805CXBA modulating furnaces
Brand: Goodman OEM

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, mounting bracket, and terminal so it seats precisely in the burner flame and reads a stable microamp signal. Generic sensors may sit at the wrong flame depth or use a weaker alloy, producing marginal signals and repeat lockouts. The genuine part restores dependable ignition proving and full flame-safety protection.

Installation

Difficulty: Easy (DIY-friendly). Usually a 10–15 minute repair. Shut off gas and power, remove the single mounting screw, unplug the sensor wire, and install the 0130F00010S in the same position — avoid touching the rod with bare fingers. Restore power and confirm a steady flame and normal heat cycle. If lockouts persist, have a licensed technician check flame-signal microamps and burner condition.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVM960805CXBA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVM960805CXBA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVM960805CXBA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu