What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVM960805CXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVM960805CXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVM960805CXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVM960805CXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-9177
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-9177 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification sensor for the AMVM960805CXAA modulating, variable-speed 96% AFUE gas furnace and compatible Goodman/Amana models. It confirms the presence of a burner flame and signals the control board to keep the gas valve open — a failed or fouled sensor is the single most common cause of a furnace that lights briefly then shuts off (short cycling on flame loss).

Specifications

OEM Part Number: 0130F00010S
Category: Flame sensor (rectification rod)
Equipment Type: Gas furnace, 96% AFUE
Fits Model: AMVM960805CXAA and related Goodman/Amana furnaces
Function: Microamp flame-current sensing for safe ignition proving

OEM vs. Generic

This genuine OEM sensor uses the correct rod length, alloy, and mounting bracket for reliable microamp signal strength. Generic sensors may read weak flame current, causing intermittent lockouts even when the burner is lit. For a flame-safety device, OEM reliability protects both comfort and safe shutoff.

Installation Difficulty

Easy (2/5). Typically a two-screw swap: shut off power and gas, remove the burner-compartment panel, unbolt the sensor, disconnect the wire lead, and install the replacement. No calibration needed. If you're replacing a dirty sensor, this OEM part restores full flame signal in minutes.

End nuisance flame-loss lockouts with a genuine OEM Goodman/Amana flame sensor.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVM960805CXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVM960805CXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVM960805CXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu