What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC951155DXAD Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC951155DXAD Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC951155DXAD Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC951155DXAD Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8978
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-8978 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Genuine Goodman 0130F00010S Flame Sensor

OEM part number 0130F00010S is the flame sensor (flame rod) for the Goodman/Amana AMVC951155DXAD 96% AFUE gas furnace. The flame sensor confirms burner ignition by measuring the microamp current conducted through an active flame. When the rod becomes oxidized, cracked, or coated, the control board loses the flame signal and shuts the burners down as a safety response — the classic symptom is a furnace that lights, runs a few seconds, then drops out and short-cycles. Replacing the sensor with the genuine part restores reliable flame confirmation and steady heat.

Specifications

OEM Part Number: 0130F00010S
Component: Flame sensor / flame rod
Fits: Goodman / Amana AMVC951155DXAD furnace
Category: Flame sensing / ignition
Function: Rectifies flame current (microamp signal) for burner proving
Equipment Type: High-efficiency gas furnace

OEM vs. Generic

Flame sensing depends on precise rod alignment, length, and mounting-bracket geometry so the tip sits correctly in the burner flame. Generic sensors often have the wrong rod length or bracket angle, producing a weak microamp signal and continued lockouts even after replacement. The genuine 0130F00010S guarantees correct positioning and a strong, stable flame-rectification signal.

Installation Difficulty

Easy (2 of 5). A common 15-minute repair. Turn off power and gas, remove the single mounting screw, unplug the sensor lead, and install the new rod — avoid touching the rod tip with bare fingers. Restore power and verify the burners hold a steady flame without dropping out.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC951155DXAD Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC951155DXAD Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC951155DXAD Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu