What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC950905DXBA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC950905DXBA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC950905DXBA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC950905DXBA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8930
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-8930 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor engineered for the AMVC950905DXBA two-stage variable-speed gas furnace and compatible Goodman/Amana platforms. The flame sensor confirms the presence of a burner flame during each ignition cycle by producing a micro-amp rectification signal the control board reads to keep the gas valve open. A dirty, cracked, or failed sensor is the single most common cause of short-cycling and "ignition lockout" no-heat calls.

Part number: 0130F00010S (OEM Goodman)
Type: Single-rod flame-rectification sensor
Fits: AMVC950905DXBA and related 95% AFUE Goodman/Amana furnaces
Material: Kanthal sensing rod with ceramic insulator
Mount: Single-screw burner-assembly mount

OEM vs. Generic

This is the factory OEM Goodman sensor — exact rod length, insulator geometry, and terminal spacing guarantee a correct flame-signal reading. Universal aftermarket sensors often sit at the wrong depth in the flame envelope, producing weak micro-amp readings and nuisance lockouts. Choose OEM for a guaranteed one-time fix.

Installation Difficulty: Easy (1/5)

Shut off power and gas, remove one mounting screw, disconnect the spade terminal, and swap in the new sensor. No calibration required. Typical replacement takes under 10 minutes for a homeowner or technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC950905DXBA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC950905DXBA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC950905DXBA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu