What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC950905DXAD — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC950905DXAD — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC950905DXAD — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC950905DXAD — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8905
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-8905 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The 0130F00010S is a genuine OEM flame sensor engineered for the Goodman/Amana AMVC950905DXAD two-stage, variable-speed gas furnace. This rod-style flame sensor generates the micro-amp rectification signal your furnace's ignition control board uses to confirm a stable burner flame. When the sensor becomes coated in oxide or silica buildup, the control board can no longer verify flame and will lock the furnace out on a failed-ignition fault — the most common cause of a furnace that lights briefly then shuts down.

Specifications

OEM Part Number: 0130F00010S
Type: Rod / rectification flame sensor
Fits Model: AMVC950905DXAD (95% AFUE modulating furnace)
Brand Compatibility: Goodman & Amana
Mount: Single-screw burner assembly mount
Material: High-temperature Kanthal sensing rod with ceramic insulator

OEM vs. Generic

This is a factory-authorized OEM component built to Goodman's exact flame-current tolerance, ensuring a strong, stable signal on the first ignition cycle. Generic aftermarket sensors are lower cost but frequently produce weaker micro-amp readings, leading to intermittent lockouts on cold mornings when the furnace works hardest. For a mission-critical safety part, OEM is the recommended choice.

Installation

Difficulty: Easy (1/5). Shut off power and gas, remove the single mounting screw, unclip the wire, and swap in the new sensor — typically a 10-minute job with a nut driver. Always test flame current after installation.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC950905DXAD — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC950905DXAD — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC950905DXAD — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu