What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC950905CXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC950905CXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC950905CXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC950905CXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

OEM Goodman Flame Sensor 0130F00010S

This genuine Goodman/Amana flame sensor (part 0130F00010S) is a direct-fit replacement for the AMVC950905CXAA 95% AFUE modulating gas furnace and many related Goodman, Amana, and Daikin models. The flame sensor confirms the presence of a burner flame during ignition; when it fails or becomes coated with oxide, the control board shuts down the burners as a safety measure, causing short-cycling or a no-heat call. Replacing this inexpensive part is one of the most common furnace repairs.

Specifications

OEM Part Number: 0130F00010S
Type: Single-rod flame rectification sensor
Compatible Model: AMVC950905CXAA (and cross-compatible Goodman/Amana furnaces)
Material: Kanthal flame rod with ceramic insulator
Application: Direct-vent / two-stage & modulating gas furnaces

OEM vs. Generic

Our OEM option is the exact Goodman-spec sensor with the correct rod length, mounting bracket, and terminal for guaranteed flame-signal microamp output. A Generic equivalent fits the same footprint at a lower price point and is ideal for budget repairs, though rod geometry may vary slightly. Both restore proper flame proving.

Install Difficulty

Easy (1/5) — Single screw and one push-on wire. Cut power, remove the old sensor, install the new one, and restore power. Typically a 10-minute job with a nut driver. No special tools required.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC950905CXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC950905CXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC950905CXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu