What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC81005CNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC81005CNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC81005CNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC81005CNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 39.95 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$39.95 $52.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The 0130F00010S is the genuine OEM flame sensor rod for the Amana/Goodman AMVC81005CNAA variable-speed gas furnace. The flame sensor uses flame rectification to confirm the burner has ignited; when it can no longer detect flame, the control board shuts the gas valve for safety. A dirty, corroded, or cracked sensor is the single most common cause of furnaces that light, run briefly, then shut down (short-cycling on flame loss).

Specifications

OEM Part Number: 0130F00010S
Type: Flame rectification sensor rod
Category: Flame Sensor
Signal: Micro-amp flame current (rectification)
Fits: Amana/Goodman AMVC81005CNAA furnace
Equipment Type: Gas Furnace

OEM vs. Generic

OEM sensors are built with the correct rod length, ceramic insulator, and bracket geometry so the tip sits precisely in the burner flame envelope — critical for a stable micro-amp signal. Generic sensors may read a weak or intermittent flame current even when clean, leading to repeat lockouts. Choose OEM for reliable ignition-proving performance.

Installation Difficulty

Easy (1/5). One of the most beginner-friendly furnace repairs: cut power, remove the single mounting screw, unplug the wire lead, and install the replacement. Route the wire clear of the burner. On restart, confirm the furnace stays lit through a full heat cycle. Handle the ceramic insulator gently and avoid touching the metal rod with bare fingers.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$39.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC81005CNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC81005CNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC81005CNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu