What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC80805DXCA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC80805DXCA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC80805DXCA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC80805DXCA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8510
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-8510 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor engineered for the Amana/Goodman AMVC80805DXCA 80% AFUE two-stage variable-speed furnace and compatible models. The flame sensor is a critical safety component that uses flame rectification to confirm the burner has actually lit. If your furnace ignites and then shuts down after a few seconds, or short-cycles on lockout, a dirty or failed flame sensor is the most common culprit.

Specifications

OEM Part Number: 0130F00010S
Function: Flame rectification / flame proving
Compatible Equipment: Goodman & Amana gas furnaces including AMVC80805DXCA
Material: Kanthal sensing rod with ceramic insulator
Application: 80% AFUE two-stage variable-speed furnaces

OEM vs. Generic

This is a factory-original Goodman part built to the exact tolerances and rod geometry the control board expects. Aftermarket generics often use lower-grade sensing rods that oxidize faster, leading to nuisance lockouts within a season or two. Choosing OEM protects your ignition control board from misreads and keeps your warranty intact.

Installation Difficulty: Easy

A straightforward 15–20 minute repair for a DIYer comfortable removing the burner compartment door. Cut power, remove the single mounting screw and quick-connect wire, swap the sensor, and reassemble. No specialty tools required beyond a 1/4" nut driver. Always shut off gas and power before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC80805DXCA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC80805DXCA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC80805DXCA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu