What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC80805DNBC Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC80805DNBC Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC80805DNBC Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC80805DNBC Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8466
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-8466 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is the OEM flame sensor (flame rod) that proves burner ignition to the furnace control board. A dirty, oxidized, or failed flame sensor is the single most common cause of short cycling and no-heat lockouts — the burners light, then shut off within seconds. This factory sensor is a direct fit for the Amana / Goodman AMVC80805DNBC 80% AFUE modulating gas furnace and restores reliable, uninterrupted heating.

OEM Part Number: 0130F00010S
Category: Flame Sensor / Flame Rod
Fits Model: AMVC80805DNBC (Amana/Goodman 80% furnace)
Function: Proves flame via micro-amp rectification signal
Material: Kanthal rod with ceramic insulator
Brand: Goodman (Amana compatible)

OEM vs. Generic

The genuine Goodman sensor uses the correct rod length, bend, and mounting bracket so it sits in the exact flame path the control board expects. Generic sensors can read a weak micro-amp signal in this burner assembly, causing intermittent lockouts even when the part is new. Choose OEM for a stable flame signal.

Installation Difficulty

Easy. Shut off power and gas, remove one screw, unplug the wire, and swap. Most homeowners finish in 10–15 minutes. Handle the rod by the bracket only to avoid contaminating the sensing surface.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC80805DNBC Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC80805DNBC Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC80805DNBC Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu