What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC80805CNBA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC80805CNBA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC80805CNBA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC80805CNBA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8375
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-8375 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement engineered for the Goodman/Amana AMVC80805CNBA two-stage variable-speed gas furnace. The flame sensor confirms burner ignition by producing a micro-amp rectified signal to the control board. When it becomes coated with oxide or silica, the furnace lights and then shuts down within seconds — the classic short-cycling, no-heat symptom. Installing this OEM sensor restores dependable flame proving and continuous heating.

Specifications

OEM Part Number: 0130F00010S
Fits: Goodman & Amana AMVC80805CNBA and related 80% AFUE furnaces
Function: Flame rectification / flame proving
Material: Kanthal rod with high-temp ceramic insulator
Single-terminal spade connection

OEM vs. Generic

Our OEM 0130F00010S is built to Goodman's exact rod length, mounting bracket, and insulator geometry, ensuring the sensor sits correctly in the flame envelope for a stable micro-amp reading. Generic sensors often have slightly different rod positioning that can cause weak signal and nuisance lockouts. Choose OEM for guaranteed fit and long-term reliability.

Installation Difficulty

Easy (1 of 5). Shut off power and gas, remove one mounting screw, unplug the spade terminal, swap the sensor, and reconnect. No calibration required. Typical replacement takes under 15 minutes for a homeowner comfortable working inside the burner compartment. Cycle power and confirm a steady flame after install.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC80805CNBA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC80805CNBA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC80805CNBA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu