What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC80804CNCA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC80804CNCA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC80804CNCA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC80804CNCA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8330
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-8330 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement flame rectification rod engineered for the AMVC80804CNCA gas furnace and other compatible Goodman and Amana variable-capacity models. The flame sensor confirms burner ignition by conducting a micro-amp rectified current through the flame back to the control board — a weak or corroded sensor is the single most common cause of short-cycling and lockout faults on modern furnaces.

Specifications

Type: Flame rectification sensor rod
Fits: AMVC80804CNCA and compatible Goodman/Amana furnaces
OEM Part Number: 0130F00010S
Material: High-temperature stainless steel probe with ceramic insulator
Connection: Single spade terminal
Equipment: Gas furnace

OEM vs. Generic

This is the factory Goodman OEM sensor, built to the exact probe length, rod alloy, and insulator spec of the original. Generic aftermarket flame sensors often use thinner probes that oxidize faster and can produce unstable micro-amp signals, leading to intermittent lockouts. Choosing OEM guarantees a correct flame-signal reading and preserves your equipment warranty.

Symptoms of a Failing Flame Sensor

Furnace ignites then shuts down after a few seconds
Repeated ignition lockout codes
Intermittent no-heat calls, worse in cold weather

Installation Difficulty: Easy

Rated Easy (1/5). Shut off power and gas, remove the single mounting screw, unplug the spade connector, and swap in the new sensor — typically a 10-minute job. Always cut power at the disconnect before servicing. If you are unsure, consult a licensed HVAC technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC80804CNCA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC80804CNCA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC80804CNCA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu