What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC80803BNCA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC80803BNCA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC80803BNCA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC80803BNCA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8268
Price: 29.95 USD
Availability: InStock

SKU: GOODMAN-8268 Brand: Goodman

$29.95 $39.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod designed for the AMVC80803BNCA gas furnace. The flame sensor confirms to the control board that the burners have actually lit; if it fails to detect flame, the board closes the gas valve within seconds as a safety measure. A worn or contaminated flame sensor is one of the most common causes of furnaces that ignite then shut down (short cycling on no-flame lockout).

Specifications

Part Number: 0130F00010S
Type: Flame Sensor / Flame Rectification Rod
Fits: Goodman/Amana AMVC80803BNCA furnace
Function: Proves burner flame to the ignition control
Material: Kanthal-type sensing rod with ceramic insulator
Equipment: 80% AFUE two-stage gas furnace

OEM vs. Generic

The OEM sensor provides the exact rod length, mounting bracket, and terminal that the control board expects for a strong, stable microamp signal. Generic sensors can produce weak or erratic flame signals leading to intermittent lockouts. OEM is the reliable choice for a trouble-free ignition sequence.

Installation Difficulty

Easy — Usually a single mounting screw and one push-on wire connector. Cut power to the furnace first. This is a common DIY-level repair; route the sensor wire clear of the flame path and avoid touching the new rod with bare fingers.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$29.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC80803BNCA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC80803BNCA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC80803BNCA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu