What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC80704BXAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC80704BXAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC80704BXAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC80704BXAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8235
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-8235 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S flame sensor is a genuine OEM replacement part engineered for the AMVC80704BXAB variable-speed gas furnace and compatible Goodman/Amana models. The flame sensor is the safety component that confirms a flame is present after ignition. When its rod becomes oxidized or cracked, the furnace will light briefly then shut down (short-cycling on flame-proving lockout). Replacing this inexpensive part typically restores dependable heat.

Specifications

OEM Part Number: 0130F00010S
Component: Flame sensor / flame rod
Fits Model: AMVC80704BXAB (Goodman/Amana 80% variable-speed furnace)
Function: Flame rectification / flame proving
Equipment Type: Gas Furnace

OEM vs. Generic

Our OEM Goodman sensor is built to the exact resistance and mounting spec of the original, ensuring the control board reads a proper microamp flame signal. Generic universal sensors may fit physically but can produce weak or erratic signals that trigger nuisance lockouts. For this safety-critical part we recommend OEM.

Install Difficulty

Easy (1/5) — Cut power at the furnace, remove one mounting screw, unplug the wire lead, and swap. A light cleaning of the new rod with fine steel wool before install is optional. Most homeowners complete this in under 10 minutes.

Always disconnect power before servicing. If you are unsure, consult a licensed HVAC technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC80704BXAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC80704BXAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC80704BXAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu