What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC80704BXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC80704BXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC80704BXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC80704BXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8223
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-8223 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S flame sensor is a genuine OEM flame-rectification rod for the Amana/Goodman AMVC80704BXAA gas furnace and compatible models. This sensor confirms to the control board that the burners have actually lit, allowing the furnace to keep the gas valve open. A dirty, oxidized, or weak flame rod is the leading cause of furnaces that light briefly then shut off (short cycling) or lock out after several failed tries.

Specifications

Part number: 0130F00010S
Type: Flame sensor / flame rod (rectification)
Function: Proves burner flame to control board
Signal: Microamp flame-current sensing
Brand fit: Goodman / Amana furnaces
Primary model: AMVC80704BXAA

OEM vs. Generic

The genuine OEM 0130F00010S delivers the correct rod length, position, and mounting bracket so it sits precisely in the flame for a strong, stable microamp signal. Generic rods can sit too high or low in the flame, producing a weak signal and nuisance lockouts even when combustion is fine. For consistent flame proving, the factory sensor is the reliable choice.

Installation Difficulty

Easy (1 of 5). The flame sensor is a single-screw, single-wire replacement at the burner assembly. Cut power at the furnace switch and breaker before servicing. Tip: many flame-sensor problems are simply oxidation — if you are troubleshooting, try gently cleaning the rod with fine abrasive pad first; replace with this OEM part when cleaning no longer restores a stable flame signal.

Genuine OEM Goodman quality for dependable flame sensing and steady heat.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC80704BXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC80704BXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC80704BXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu