What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC80604BXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC80604BXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC80604BXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC80604BXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-8165
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-8165 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S Flame Sensor is a direct-fit replacement for the Goodman/Amana AMVC80604BXAA two-stage variable-speed gas furnace. This flame rectification rod tells the control board that a flame is present after ignition. When it becomes coated or corroded, the furnace will light briefly then shut down on lockout — the single most common cause of short-cycling and repeated ignition failures.

Specifications

Type: Flame rectification / flame sensing rod
OEM Part Number: 0130F00010S
Brand: Goodman / Amana
Equipment: 80% AFUE two-stage furnace (AMVC80 series)
Single-rod design with spade/screw terminal
High-temperature Kanthal sensing element

OEM vs. Generic

Our OEM flame sensor is the exact factory component with the correct rod length, mounting geometry, and terminal, guaranteeing proper flame signal microamps and control-board compatibility. Aftermarket Generic sensors are lower cost but can vary in rod length and material, sometimes producing a weak flame signal that triggers nuisance lockouts. For a reliable long-term fix on a variable-speed furnace, OEM is recommended.

Install Difficulty: Easy

A single screw and one wire connection. Turn off power, remove the burner-compartment access panel, unplug the sensor lead, remove one mounting screw, and swap. Most homeowners complete this in under 15 minutes. Lightly cleaning a still-good sensor with fine emery cloth is a valid first step, but a pitted or cracked rod should always be replaced.

Compatible with Goodman and Amana AMVC80604BXAA furnaces. Backed by genuine OEM quality.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC80604BXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC80604BXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC80604BXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu